Headlight & Taillight Tint Film For BAIC BJ30

Video installation tutorial

Customize the look of yourBAIC BJ30with thisfront and rear light tint film. Designed for a precise fit, it provides a sleek blackout effect, giving your headlights and taillights a sporty, modern appearance. Made from high-quality, durable adhesive vinyl, the film is scratch-resistant, weatherproof, and easy to apply without damaging the original lights. A simple and stylish upgrade to enhance your SUV’s exterior aesthetics and individuality.

Film Installation Tutorial

1. Prepare the Soapy Water
   Add one drop of dishwashing liquid to a spray bottle filled with water. Shake well to mix evenly.

2. Clean the Surface
   Thoroughly clean the area where the film will be installed with a clean towel, making sure the surface is free of dust, dirt, and grease.

3. Wet the Surface
   Spray the entire tail light evenly with the soapy water.

4. Wet the Film
   Spray the adhesive side of the film thoroughly with the soapy water. Make sure the entire adhesive surface is wet.

5. Position the Film
   Carefully place the film onto the tail light. Since the surface is wet, you can gently move the film to adjust its position. Take your time to align it carefully with the edges and contours of the tail light.

6. Squeegee Out the Water
   Starting from the center and working toward the edges, gently use a squeegee to push out the water and air bubbles. Continue carefully until all the water has been removed and the film is firmly attached.

7. Complete the Installation
   Carefully check the entire surface to make sure there are no remaining water bubbles, wrinkles, or misaligned areas.

Note: The installation method is the same for all other positions. Always keep both the surface and the adhesive side of the film wet during positioning, and work slowly and carefully for the best result.